G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Knowledge Vault (tech, parts, apparel, & accessories topics) » Troubleshooting (Poor Starting/Running/Handling/Ride Issues) » Archive through June 03, 2008 » Engine temperature sensor

« Previous Next »

Author Message   Brewtus Posted on Sunday, May 18, 2008 - 11:26 pm:        I was trying to re-tune my 03 XB9S because it started acting really weird (cutting out at 4000 RPM and going from 14.5 to 10.0 AFR)Finally pulled a code for ETS sensor. My question is: would the ETS sensor cause this? What size socket is needed? I went through the search but found one saying 9/16 and another 1/2 inch. (by the way the direct link cable works fine with ecm spy.) Thanks, Rob   Bombardier Posted on Monday, May 19, 2008 - 02:30 am:        13mm and you need to cut a 3mm slit down the side like an O2 sensor tool for the cable to lay in. Put the socket in a vise and take to it with an angle grinder.   Brewtus Posted on Monday, May 19, 2008 - 10:08 am:        Thanks!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: