G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Knowledge Vault (tech, parts, apparel, & accessories topics) » Engine » Fuel System: EFI/DDFI, Carb., Filter, Pump, Tank, Filler-Cap, Fuel » Archive through January 26, 2009 » X1 tuning « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Mutant_m2
Posted on Wednesday, May 07, 2008 - 01:22 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Alright heres the problem I bought a 99 X1 and its stock except for the vance-and-hines slip-on. I know it runs lean so it needs to be tuned. I read a lot of the threads on tuning but couldn't really find thing that said that one tuner is better than any other. Any help on which one is better would help.
Top of pagePrevious messageNext messageBottom of page Link to this message

Bad_karma
Posted on Wednesday, May 07, 2008 - 01:37 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

ECMSPY is free, just make the cable or get with AL at American Sport Bike he has software and experience.
Joe
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellisticx1
Posted on Saturday, May 17, 2008 - 01:35 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Do you know the real AFV after ride in closed loop learn mode.

The AFV will tell you if you ride LEAN and how much lean...

Good luck.
Top of pagePrevious messageNext messageBottom of page Link to this message

Mutant_m2
Posted on Tuesday, June 10, 2008 - 10:17 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I bought a DL from American Sport bike and am having a few problems how do I get a hold of Al?
Top of pagePrevious messageNext messageBottom of page Link to this message

Jsimpkins
Posted on Friday, July 04, 2008 - 11:01 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I have the cable and VDSTS software. I have the race ECU and Stock ECU. The AFV on the stock shows 100% on the Race ECU 85%. What the heck does this mean? I have a stock header with a TwoB pipe and the Race filter and stock air box. It pulls good until about 4000 then falls on its face up to red line. Is this the stock header and Race map? With the race ECU the above scenerio is true, with the Stock ECU I loose low end torque but gain some top end. She pulled to 140 yesterday on a test run with stock ECU. The race ECU will only pull to about 125. Also I have an occasional "quit" or stumble when at constant speed at any speed. I believe this to be the ECU resetting, however no one has ever been able to confirm whether or not the ECU resetting will cause this. I believe the ECU runs lean on reset then adjust. I do have a race header, which is cracked, along with the race muffler (if you can call it that). I am getting it repaired and hope it will cure this latest issue. Is there a site that has "maps" for different configs?
Top of pagePrevious messageNext messageBottom of page Link to this message

Bad_karma
Posted on Saturday, July 05, 2008 - 01:01 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Jason
I had a problem like this with my two brothers can. It turned out that the exhaust pressure would move the can back wards about 1.5 to 2 inches during higher rpms. I ended up with stiffer springs and safety wired the muffler to the elbow supplied. So check out muffler when you are riding and see if it is moving.
Joe
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration