G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Arkaybee Posted on Sunday, April 20, 2008 - 09:12 pm:        Installed a Backoff XP taillight flasher today. A post on another thread here said that the brake light wire in the harness running left of the fuse panel was red/white. There were two orange/white and two red/yellow wires; no red/white. I cut each one at a time, getting "lucky" on the last wire... Everything is connected back up with bullet connectors, the XP works but I have no signals, tail light or combined high/low headlight. Everything worked before and the light fuse tests good for continuity. What am I missing here? Thanks in advance.   Arkaybee Posted on Sunday, April 20, 2008 - 09:18 pm:        EDIT: The ground wire on the XP is connected to the black ground screw beside the front corner of the fuse, along with the other three ground wires that terminate there.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: