Author |
Message |
Ferocity02
| Posted on Wednesday, December 19, 2007 - 02:20 pm: |
|
Hey there, I have an 05 XB12Scg. I would like to remove the passenger foot peg mounts but I see that there are nuts on the other side of the bolts that appear to hold down a bracket. This bracket seems like it might hold the battery? Is this nut on the back necessary? I don't want to have to put the bolts back in to hold down the bracket and have the bolt heads sticking out. Any help would be appreciated, thanks! |
Ferocity02
| Posted on Sunday, January 06, 2008 - 10:05 pm: |
|
Anyone? |
Sath
| Posted on Monday, January 07, 2008 - 08:34 am: |
|
I don't think you need the bolts. The nuts seem to keep the bolts from backing out. |
Speedkills
| Posted on Sunday, July 13, 2008 - 03:54 am: |
|
Take off the rear peg brackets and then put the nut and bolt back on. The bolt is for the bracket. The nut is part of the battery hold down. |
Packrat
| Posted on Sunday, July 13, 2008 - 10:42 pm: |
|
Don't worry about those nuts...the battery isn't going anywhere been running mine for a while w/out putting bolts back in....battery and bracket are doing just fine...the bolts on mine were SOOOO tight, I actually twisted one of them off, trying to back it out...Whack the crap out of the bolt head before you try to take them out...I had to use a 2 foot "cheater bar" on my 1/2 drive ratchet to get them out ! |
|