| Author |
Message |
    
Hi_plains_drifter
| | Posted on Thursday, November 08, 2007 - 12:21 am: | 
|
Where is this vacum fitting supose to go to?
I am curantly trying to diagnose a knock in my 03-XB9R. I fear that it mite be a rod bearing, but I want to try all the easy stuff first. I don't think I've ever had this port plugged in to any thing. So maybe you guys can help me out. Thanks in advance.
|
Diablobrian
| | Posted on Thursday, November 08, 2007 - 01:53 am: |
|
Doesn't that go to the charcoal can on the CA models? |
Hi_plains_drifter
| | Posted on Thursday, November 08, 2007 - 02:50 am: |
|
If so then I just don't need it. I don't have a charcoal can |
Diablobrian
| | Posted on Thursday, November 08, 2007 - 03:00 am: |
|
It is supposed to be capped off if that is the fitting I think it is. |
Hi_plains_drifter
| | Posted on Thursday, November 08, 2007 - 03:54 am: |
|
I'll try caping it. Maybe the cap blew off in a back fire. But it's been open for 3000-4000 miles. |
Diablobrian
| | Posted on Thursday, November 08, 2007 - 04:48 am: |
|
You may need a tps and AFV reset afterwards to get your ECM re-calibrated. |
Ironken
| | Posted on Thursday, November 08, 2007 - 08:53 am: |
|
I noticed my 12S has that same fitting....uncapped as well. Anybody else? |
Al_lighton
| | Posted on Thursday, November 08, 2007 - 09:41 am: |
|
Doesn't that go to the charcoal can on the CA models?
Yup. Cap it if you're not running it into the charcoal canister. Or rather, OUT of the charcoal canister, that is how the engine pulls clean air through the gas overflow evap canister to recharge it. |
Deadduck
| | Posted on Saturday, November 17, 2007 - 09:18 am: |
|
mine is uncapped as well on my 12r |
Troubleshooting (Poor Starting/Running/Handling/Ride Issues) »
Archive through March 20, 2008 »
03XB9R Where is this vacum fiting supose to go to?