G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Chrisp Posted on Wednesday, October 31, 2007 - 11:04 am:        I'm about to replace the rocker box gaskets on an 07 Uly with the OEM gasket kit. Any advice on whether to use or not use an additional sealant on the lower gasket? The new one is steel and has some type of flexible coating. It is identical to the one that failed.   Bluzm2 Posted on Wednesday, October 31, 2007 - 05:46 pm:        Should be no need for extra sealant. Just make sure both surfaces are really clean. Also, proper torquing is MANDITORY. Don't guess, use a torque wrench and the service manual for spec's and sequence.   Blake Posted on Wednesday, October 31, 2007 - 05:52 pm:        I'd ad "dry", clean and dry. If your gaskets are leaking, that'd be a warranty item that your dealer must cover, in case you didn't know.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: