G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Knowledge Vault (tech, parts, apparel, & accessories topics) » Troubleshooting (Poor Starting/Running/Handling/Ride Issues) » Archive through October 31, 2007 » Ignition timing without light...won't start 97 S1

« Previous Next »

Author Message   Skntpig Posted on Saturday, October 13, 2007 - 02:16 am:        Stock ignition. Tried to put it back where it was but I guess I don't know exactly were it was. I get nothing. I also checked coil and it works, I don't think I am getting spark when trying to start. What am I missing? Tried XL1200 module but no luck, same. Did many tests in service manual. I need to get to a starting point. Searched all over KV. New battery, although sometimes I get a clicking and no turn over from starter. Even when it cranks over It doesn't fire. Any suggestions? How do you test nose cone unit? Thanks for the help.   Skntpig Posted on Saturday, October 13, 2007 - 08:12 am:        Bike night is tonight and I will only have an hour after work to finish. When testing the Red and Green wires that go from triangle connector to the nose cone I only get 5.5V...New regulator?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: