G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Rookie Posted on Saturday, June 21, 2003 - 04:21 pm:        I have a leaky base gasket leak on the front cylinder, what's the easiest way to brace the motor before removing the front isolator mount from the frame. Thx, Adam 99M2   Rippin Posted on Monday, June 23, 2003 - 09:59 pm:        Rook, I always use a racheting tiedown around the upper frame and all the way around the motor/trans between the shock and cases Ryan   Ryker77 Posted on Sunday, September 18, 2005 - 07:38 am:        now that would be easy.. better than wood blocks   Pammy Posted on Wednesday, September 21, 2005 - 07:35 pm:        I use a scissor jack. That way I can move the motor up and down to make removing the heads and cylinders easier. Then when I have removed all I need, I use a tiedown. So I can roll the bike around.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: