| Author | Message | ||
     Bombardier |
I have been told this is the sensor of choice but how the hell do I wire it in? It has five wires whereas the std one has 2 two. Any suggestions? I want to put one in the front exhaust as well to tune on a dyno and feed realtime to the ecu when running. | ||
| Xb9 |
You can't just replace a narrowband with a wideband. You need a controller for the wideband like the Zeitronix: http://www.zeitronix.com/Products/zt2/zt2.htm This one has the Simulated Narrowband Output to feed a stock ECU & Adjustable Narrowband Switching Point if you want to run the ecm at something other than 14.7:1 I've used it quite extensively and successfully in developing custom maps. You can buy Palm software to datalog from it. |
