Author |
Message |
Buelltilicious
| Posted on Wednesday, August 15, 2007 - 09:10 pm: |
|
Has anyone used these risers for their XB http://www.roxspeedfx.com/cgi-bin/cart/showitems.c gi?subcat_id=268 If so how did they work out |
Kdkerr2
| Posted on Wednesday, August 15, 2007 - 10:37 pm: |
|
I haven't run them but I see no reason why they shouldn't work. What interested me is that they will also bolt to a Tubey handlebar clamp also if that's a bro's thing. KK |
Al_lighton
| Posted on Thursday, August 16, 2007 - 10:08 am: |
|
We started carrying them after several folks in the Big, Bad and Dirty Uly section expressed interest. They fit on a Uly without any cable lengthening, but I haven't heard back from those with Lightnings installing them. Do a search here on the board under "Rox" and you'll find those posts and even some installed pictures. http://www.americansportbike.com/shoponline/ccp0-p rodshow/16108.html (Message edited by al_lighton on August 16, 2007) |
Packrat
| Posted on Friday, September 14, 2007 - 04:09 pm: |
|
Just installed the 2 inch version on my XB12Scg last night!!!! WAY better for me,,,much less strain on neck and wrists. Didn't have to replace any cables or hoses, even though I did buy a 2 inch longer brake hose..got 'em from American Sport Bike..nice folks, FAST shipping.. |
Kurbennett
| Posted on Tuesday, September 08, 2009 - 11:54 am: |
|
Old thread but will update. Got the Rox Risers mounted over the weekend. Still some fine tuning to do but they make a definite difference. A little binding of the throttle cable as well but will see about some cable repositions to fix it. Only issue was tightening down things as the risers cover up some bolt heads. I am cutting an allen wrench to fit in the space. |
|