| Author | Message | ||
     Bad_karma |
A few years ago I ran across a final drive belt that was separated and when placed together it used four pins. This allowed replacement with disassembly. Has anybody seen or experienced this belt. I thought I saw it on one of the HD sites. Joe | ||
| Interceptor |
http://www.latus-harley-davidson.com/Belts-1244-pl ist.html found that link, but they didn't have em for our application. | ||
| Bad_karma |
Christian Thanks I will look from here. Joe | ||
| Interceptor |
I did think that if nobody made one for our application, that it might be possible to buy a larger one and cut it down to 128 teeth. | ||
| Mikej |
You'll have to drill the ribs as well for the pins that hold it together, plus I think the belts are either cut at an angle or at a V to fit the ends together (I've only seen pics in catalogs of them). | ||
| Bad_karma |
Aren't the big bikes belts wider? Joe | ||
| Interceptor |
THey must have one for a sportster. It is such a common bike. | ||
| Bad_karma |
Christian I agree, I will modify my searches from Buell to sportster and see it I get any returns. Joe | ||
| Mikej |
Doesn't look like they have one for the XL. Might try some of the belt companies, not sure who makes the FL one for the H-D's. link |
