| Author |
Message |
    
Techmikeny
| | Posted on Thursday, June 28, 2007 - 02:12 pm: | 
|
Was riding home from work in a rain/lightning storm, bike stalled out. Shut off run switch, turned off key to reset, turned back on, lights come on, no neutral light, no oil/fuel light. Turn on run switch, nothing. Checked fuses, found a blown ignition fuse. Replaced fuse, same thing, fuse blows after attempting start. Checked for any frayed wires on the surface, all looked normal.
Any ideas or similar experiences?
Thanks, Mike |
Jflaig
| | Posted on Monday, July 02, 2007 - 12:59 pm: |
|
Since you have checked for frayed wires, now check for good grounds. Make sure that they are all tight and clean. |
Reepicheep
| | Posted on Monday, July 02, 2007 - 02:28 pm: |
|
There were some cases here where the socket to the tail lamp failed into some sort of internal short mode. It was within the socket itself. |
Romhal
| | Posted on Tuesday, July 03, 2007 - 05:22 am: |
|
I have the same problem, and nobody can solve this problem, but in Estonia we have no official dealer.
So if you have found the solution - write it down. |
Techmikeny
| | Posted on Saturday, July 07, 2007 - 01:08 am: |
|
The local dealer has determined that the fuel pump "took a crap". They said the part would be delivered this passed thursday or friday (July 5 - July 6) No word from them yet. Going to call on Saturday for an update. If the problem still exists, I'll mention the tail light issue.
Later,
Mike |
Techmikeny
| | Posted on Friday, July 13, 2007 - 10:00 pm: |
|
Still waiting for the part. Not happy |
|
Troubleshooting (Poor Starting/Running/Handling/Ride Issues) »
Archive through August 08, 2007 »
Blown ignition fuse, XB12X