G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Indy_bueller Posted on Tuesday, April 17, 2007 - 07:17 pm:        Can anyone tell me on what page of the 2003 XB9 manual shows the procedure for removing the drive sprocket from the engine? I can find everything EXCEPT that. I mean the drive belt sprocket.   Indy_bueller Posted on Tuesday, April 17, 2007 - 07:25 pm:        Nevermind, I found it. Page 6-47.   Blake Posted on Wednesday, April 18, 2007 - 06:17 pm:        Left hand threads!   Indy_bueller Posted on Wednesday, April 18, 2007 - 06:46 pm:        No problem Blake, I'm left-handed. Anyone know if there is a torque spec for that nut? I can't find one.   Blake Posted on Thursday, April 19, 2007 - 01:04 am:        Page 6-48 and 6-49, tighten initially to 50 FT-LB, then tighten an additional 30o - 40o. If needed you can tighten to a max of 45o in order to get the reversible locking plate screws to engage, but do not exceed that 45o.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: