G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   5liter Posted on Wednesday, October 18, 2006 - 08:43 pm:        I have a PM wheel I need to replace the pulley on. Are the pulley bolts loctited in the wheel?   Blake Posted on Wednesday, October 18, 2006 - 10:15 pm:        Yes. A good sized 1/2" drive socket wrench should get them loose in good form.   Road_thing Posted on Thursday, October 19, 2006 - 09:15 am:        I've had good luck heating the bolt heads with a propane torch before putting the wrench to 'em, it seems to loosen up the thread locker that the factory puts in there. rt   5liter Posted on Thursday, October 19, 2006 - 06:46 pm:        Thanks.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: