| Author | Message | ||
     Chelgeorge |
I'm having a hard time finding anywhere to buy aftermarket turn signals for my 02 blast!. I know that they're not so popular, but there's gotta be something out there. or am i stuck with the stock signals? the only ones i found so far were not even DOT approved b/c they're too small to be safe. Any suggestions? | ||
| Bomber |
lots of choices from the usual suspects (sponsors, Dennis Kirk, et al) if you don't look for something specifically listed for your P3, you'll be fine -- just about any aftermarket turn signal can fit, though the connectors may be different sizes non-DOT doesn't mean non-safe, btw, just means they don't meet the requirements (not enough reflectivity, too small for regs) -- regualtions and safety are not equal, IMO | ||
| Mikej |
You might also consider the Buell X1 turn signals. I put them on my M2, took a little massaging with a rattail file for the front ones though to get them to fit right. The X1 turn signals have the bendy/flexible posts/stalks/shafts so if you accidently bump into something they don't snap right off. Might be an option to consider. | ||
| Matty |
The blast comes with the X1 signal stock. Have you looked at Lockhart-Phillips? Tons of choices in there. (Message edited by matty on June 20, 2006) | ||
| Mikej |
Oops, okay, never mind then. |
