G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Davo Posted on Monday, June 05, 2006 - 09:00 pm:        I got stuck in traffic the other day and the Uly was running pretty hot so I turned off the engine and let her cool down. The fan finally went off and the traffic started to move again so I started the engine and had to wait until the ET reached 428 F before the fan would restart. I have an idea! What if I connected a circuit to pin 9 on the grey ECM connector through a push button switch then through a 200 ohm resister and then to ground. I could then start the fan by simply pushing the button for a second and then the ECM would think the engine was hot enough for the fan to turn on without waiting for 428 F. I know the fan would only continue to run if the engine temperature was above 356 F. Does anyone see any potential problems with my idea?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: