G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Edmbueller Posted on Wednesday, May 31, 2006 - 11:36 pm:        Has anyone had any success pulling out a dent from the frame on an XB? The point that usually gets hit under where the frame puck goes...   Björne666 Posted on Friday, August 31, 2007 - 01:50 pm:        I also have a dent in the same position. I am fearing that it will weaken the aluminum alloy to pull it out. My plan is to go with chemical metal, fiberglass bondo and top it off with fine bondo. Anyone done a dent repair and can share a good method? /Björn, Sweden   Jaydub Posted on Tuesday, January 08, 2008 - 02:36 pm:        i had the same dent on my bike and did not want to weaken it by pulling it out - i used quick steel putty, and sanded and blended it into the frame puck: total cost under $20 Used frame = $250 and up + installation New Frame = $1250 + installation I think it looks pretty good all things considered   Mr_gto Posted on Thursday, February 07, 2008 - 12:51 am:        Jaydub, do you have pics on how you did this? My wifes scg has a dent and i was trying to figure out how to do this. Not much of a body man more of a wrench head any tips would help!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: