G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Bueller69 Posted on Friday, April 07, 2006 - 08:00 pm:        I made my airbox into a free flow, I'm also installing a D & D can and Race ECM. Any ideas of what to do with all this garbage on top of the airbox? Can the entire mess be eliminated with the new ECM, or will it screw things up? Thanks!   Navydiver220 Posted on Thursday, April 13, 2006 - 05:24 pm:        The servo cable can be removed. You won't need it with the race ECM and D&D can. The 4-pin servo power plug can also be pulled out and tie-wrapped outside of the airbox. Make sure you leave the tank vent routed as is.   Bikin2222 Posted on Thursday, April 13, 2006 - 08:58 pm:        Thanks Navy. When you say Fuel vent "as is", do you mean in the same position? Because I was going to route it along the side of the filter? Thanks again.   Diablobrian Posted on Tuesday, May 16, 2006 - 04:45 am:        routing it along side the filter will be fine as long as the tube does not become kinked.   Sgthigg Posted on Wednesday, August 02, 2006 - 09:47 pm:        Not trying to hi jack this thread..But where did you get the mount for your radar detector?? I am lookin for something like that..Do you have anymore pics of it you can send to me? Thanks

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: