G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Rempss Posted on Sunday, February 09, 2003 - 01:46 pm:        A Lighting, Thunderstorm or any Evolution Sportster should do. I am working on a oddball project and I need a measurement. The more accurate the better, but a close idea if you have no more than a ruler would help also. I need the dimension between pin bosses, see the picture below. If you can I would like the measurement at the top and bottom of the boss if it tapers. Thanks, Jeff   Snowdave Posted on Sunday, February 09, 2003 - 02:43 pm:        Will a set of wiseco's do?   Steveshakeshaft Posted on Sunday, February 09, 2003 - 02:46 pm:        I've just been and measured 1 Buell Thunderstorm piston for you. It measures 25.4 to 25.6 mm, or an inch to just over. HTH Regards Steve www.ukbeg.com   Snowdave Posted on Sunday, February 09, 2003 - 10:30 pm:        Wiseco's are 1.159" at the bottom and 1.055" at the top. That translates into approximately 29.4/26.8mm.   Rippin Posted on Tuesday, February 11, 2003 - 08:12 pm:        Snowdave, Sounds like you need to come down with us and ride the Elizibeth-Galena curvepike. Ryan

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: