G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Ccryder Posted on Wednesday, February 05, 2003 - 10:46 pm:        Just in case any of you XB Buelligans are interested, Wileyco has a new exhaust for you. Take a look: Later Neil S.   Jlaw68 Posted on Tuesday, February 11, 2003 - 01:01 am:        what does it sound like though? i've read the material on the slip-ons for the previous models and the claim a hp and torque gain, but they claim that they are a quieter muffler? any input?   Bykergeek Posted on Tuesday, February 11, 2003 - 12:09 pm:        I want to hear one. The clip on their site was not very revealing and the dyno chart didn't show last time I looked.   Miguel Posted on Tuesday, February 11, 2003 - 01:52 pm:        Or you could do what any reasonable man would do------make one o` these   Miguel Posted on Tuesday, February 11, 2003 - 01:56 pm:        And heres the photo---   Bykergeek Posted on Tuesday, February 11, 2003 - 06:43 pm:        Making a reasonable exhaust is not hard; My welding ability is pretty damn good. The single hardest thing about making a properly fitting muffler for the XB9 is getting the chin spoiler mount points right. I don't want to spend a lot of time making a jig to fabricate a production run of 1 muffler.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: