G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   1stbuell Posted on Tuesday, March 07, 2006 - 10:14 pm:        '05 XB12R 2000 miles on it. I just noticed that my brake light is not coming on when I apply the front brake only (rear works fine). I checked what I could and everything seems to be fine. Brakes and suspension are stock. Any suggestions?   Stretchman Posted on Thursday, April 20, 2006 - 10:43 am:        Same problem. Just discovered today, and it was in service yesterday, and still under warranty. SO I am a little perplexed. Someone said that they simply unplug, and maybe the plug isn't making contact. Stretch   Prismman Posted on Saturday, April 22, 2006 - 08:31 am:        I had something similar happen after a tune up. The service tech tightened the screw that holds the switch in place. This screw needs to be backed out about 1 1/2 turns to allow the switch to travel open and and closed. Once I got the screw backed out the switch worked properly.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: