G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Bluelightning Posted on Thursday, March 02, 2006 - 11:05 am:        Does anyone know where I can get a set of the peg lowering mounts for and older S-2? I am looking for the stock pieces that lower the pegs about 1" or if flipped over, raise the pegs 1". I checked the local Buell dealers and they said the pert is no longer made/carried. I also looked through the Banke site as I was informed that they might have actually made the parts for Buell. Any other suggestions? Thanks!! Karl   Buellistic Posted on Thursday, March 02, 2006 - 11:51 am:        Bluelightning(AKA Karl): FOOTREST MOUNT PN 50548-94Y, has option of 1" inch higher OR 1" lower ... In BUELLing LaFayette   Court Posted on Thursday, March 02, 2006 - 12:43 pm:        They LOWER, they will NOT RAISE. . . UNLESS you modify them. The "touring pegs" had an "D" shape to the shaft that makes them "side specicif". With a bit of machining you could modify them. They may be tough to find but ask you dealer, or any of the sponsoring dealers here, to run that P/N. They can poll the system and see if there are any left in inventory.   Buellistic Posted on Thursday, March 02, 2006 - 02:16 pm:        Court: The WORD is "IMPROVISE" !!! The MOTHER company gives us the basic parts as in motorcycle, we then make them dance to our tune !!! In BUELLing LaFayette   Bluzm2 Posted on Thursday, March 02, 2006 - 03:11 pm:        I could use another set too!   Court Posted on Thursday, March 02, 2006 - 03:14 pm:        How many folks want/need touring pegs? Warrant a run of them?   Court Posted on Thursday, March 02, 2006 - 03:17 pm:        >>>The WORD is "IMPROVISE" !!! That's true. But, I didn't want some poor soul trying to (quite literally) fit a square (actually "D" shaped) peg in a round (actually "D" shaped the "other way) and trying to force it. The side plate he'd bugger up would not be a cheap fix. Let me know if you need detailed photos folks.   Henrik Posted on Saturday, March 04, 2006 - 01:16 pm:        I'd take a spare set. They used to be quite pricey though. As for peg raising; I used the touring peg mounts on my S3 for track duty. Flip left for right and rotate them upside down - shade tree peg risers Henrik   S2pengy Posted on Saturday, March 04, 2006 - 03:11 pm:        When they first were available I paid $40. for the kit... The kit came with a different shifter bracket (curved piece that the shifter foot peg attaches to)and rod as well as the 2 peg supports...   Bluelightning Posted on Monday, March 06, 2006 - 01:56 pm:        I just need the mounts, not the whole kit. I did some research with the PN from Lafeyette. That number is discontinued, but the new number is N0410.8 which is for the left "touring peg mount". not sure what the right side # is. Also price is around $65 each!!!! Court, I knew about the D that needed to be modified. Had expected to do that anyways. these will actually go on my X-1 so I needed to machine/fit them to be right. Since Ft Washington HD says they are still available, any way to get a better pricing on them for that kit again?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: