G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Vr1203 Posted on Friday, October 21, 2005 - 12:53 pm:        How is the lower aluminum lug attached to the steel male slider on a WP 1996 S1 front fork? I want to powder coat the lug and was wondering if I will somehow hurt the fit.   Blake Posted on Friday, October 21, 2005 - 03:29 pm:        I'm not certain, but I believe the slider is threaded into the lower lug. Hopefully someone will confirm. The service manual doesn't give any indication.   Vr1203 Posted on Saturday, October 22, 2005 - 12:44 am:        If it is threaded ,its probably has a sealant and/or loctite on the treaded area. I could loose the seal and/or melt the loctite if I was to heat the lug up to powder coat it. Like you said, hope someone confirms.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: