| Author | Message | ||
     Sagehawk |
Wanted to share there is a swapmeet in magnolia this sunday the 31st. 11 to 6 with a 5.00 entry. way it was in lamarque a while back anyhow. wanted to see who might be interested in going? if my wife goes we'll probably cage it due to heat. ive had 2 seventy hour weeks back to back and am tired of being hot. holler back and we can arrange to get together somewhere at sometime. | ||
| Anaconda_jiu_jitsu |
hey guys, ulysses owner in galveston. | ||
| Jim2 |
CMRA season opener is Feb 19-21 at MSRH. http://www.cmraracing.com/images/hp/cmra_flyer_msr h_feb2016.pdf This would be a good time for us Buellers to meet. (Message edited by Jim2 on January 10, 2016) | ||
| Sagehawk |
I'm up for that. Lot of work coming into shop in next 6 weeks with shintech shutdown. I can see Sunday being a good day. If working sat. ,we get out round 3 pm. Down to msr by 4. Day would be almost gone by then. Just saying. I'll try to get attention to the others on this jim2 | ||
| Jim2 |
Yeah, they wrap up around 430. They start early, like 7AM. Sprints are fun to watch. Back to back finish and starts, two classes at once; staggered start, ALL day long!!! Fairground atmosphere. | ||
| Sagehawk |
I saw flyer said gates open at 630. Yikes! Anyhow, Sunday would still be day I could go. I know the people I work for and how this time of year is with this shutdown. Yeah, I hate it too. | ||
| Sagehawk |
ok guys, I sent a few emails out tonight. some might think it late but some plan late anyway. I'm looking at 21st as work will probably be there sat.. is what it is. something like 8 or so am. anyone with a lunch plan, share but I have no idea how long the program will be that day. hope that a few of us will make the effort. Take care everyone. | ||
| Sagehawk |
I've contacted everyone that has posted here last several years. any different ideas, throw them out. I thought Jim2 had a good idea and I rolled with it to this point. If you can make it one of the other days, do it. At least we'll be getting out and about. I know not everyone can make everything. been there, done that. I wish all the best and look forward to meeting you all ! | ||
| Jim2 |
Or meet up for breakfast and roll in together? | ||
| Buellistic |
Selling my 1997 S3T, lots of spare parts "PLUS" ... $3,500 ... PM your phone number, will call ... | ||
| Buellerxt |
I'll try to make a Sunday meet-up 'if' I'm in town. There is a very good chance I'll be in California though. Jim, I'm pretty sure we met several years ago at MSR. I ride a black UlyXT and I remember your pretty yellow M2. I want to meet good ol' Sagehawk too. You've been a trooper trying to get us independent Buell folks together, Paul.  . Hope it all works out. | ||
| Sagehawk |
If yall like Mexican fare , guadalajara is open early for breakfast. They would have room for a group. What time or more suggestions? Buellerxt, drop the ol moniker right now. Just cuz I turned 60 in December doesn't mean I be ol! If weather doesn't cooperate as in massive rain, cold etc and races are in jeopardy, I'll still cage to breakfast. We can find a more central location to meet and visit If that is what goes on. The 21st is on for Houston Buellers no matter what happens weather wise. | ||
| Jim2 |
Guadalajara! Isn't that West of Mexico City.  I'm guessing were all spread out. I think most have to funnel South. There may be a few that are already South. I'd be fine with Guadalajara but anything off Hwy 6 South of Beltway or 288 near Pearland would seem to make sense for those inside or North of the Beltway. . My only problem is getting up early.  Buellerxt, I remember meeting you. I believe it was on the way out after the races were over. I hope you can make it again. Entrance Fee is $5 if you arrive on two-wheels. $20 if your in a cage. | ||
| Jim2 |
Buellistic! I hope you doing ok. I hate to see you getting rid of the ride, I'm sure you do too. I wish I could buy that S3T. I'm surprised it isn't sold already. Lemme know when your in Houston again we'll get together for coffee and Breakfast or whatever. Anybody looking for a cool Sport Tourer with some class should consider yours. I saw your last ride video, that Silver sure pops in the sunshine. I just love the fairing on the S3's. | ||
| Buellistic |
Jim2: When as far as to ask that anyone that is interested to PM me their phone number and "i" would call them at their convenience ... It is easier for me to tell what "i" have in the way of lots of parts "PLUS" than type it up ... | ||
| Sagehawk |
If west of Mexico city is a bit far. There is the busy bee in pearland. There is Kelleys in alvin. Other than that, I need more suggestions from you guys. There is a method to my madness as we are spread out to hell and back. I'll share at breakfast that morning but each of us will have to step up and find a spot in our own area to host. Regular meet days every so often. I mean other folks in other parts of country get together ever so often. | ||
| Jim2 |
So far I only see Sagehawk, Buellerxt, and myself as showing interest in getting together and attending the CMRA Races. Buellers...you out there? | ||
| Sagehawk |
I haven't heard anything from galveston or texas city. Buewulf is full of family to do that weekend so he has a get out of jail card. Hah! Where do you want to meet and at what time , jim2? | ||
| Sagehawk |
Ok guys. Haven't heard anything from anyone at all. Wife and I will head to msr for a while and then kick out to meet some folks for a beer tasting party. Wishing everyone a good and safe weekend! | ||
| Jim2 |
Sage, didn't mean to leave you guessing. I still plan to be at msr. Was gonna suggest skipping the meet for breakfast since I can't pin down a time. | ||
| Sagehawk |
its all good jim2. my uly is camo, and wifes sporty is blue. I'll be wearing something miniony as that always stands out in a crowd of adults. grandboy and I love those shows. am looking forward to meeting you. Take care and ride safe. | ||
| Sagehawk |
Thanks to jim2 and Buellerxt for coming out to msr for racing. I enjoyed meeting you all and visiting. Keep in mind to pick a spot in your area for meeting. We need to pick a frequency and stick to it. I'm sure as time goes on, we'll get more folks drawn in to the madness! | ||
| Jim2 |
I enjoyed meeting ya'll and seeing two very fine Uly's  | ||
| Tmbabb |
I am an avid Bueller in Baytown. I presently own both a 1998 S1, and S1W. And also a 2001 M2 Cyclone. 1st motorcycle was a 1997 Buell Cyclone. Man, I miss that bike. I am considering selling the S1, but gonna be tough to let go. Just wondering where the Buell stuff happens. Didn't even realize we have a Houston area group. I'd love to hear from any Buell fans... | ||
| Sagehawk |
Hello and welcome Tmbabb! Glad to here from you. As you can tell from series of posts here, there really isn't much buell stuff happening in this area. Just now recently met Jim2 and Buellerxt after trying to meet for bout 3 years. Buewulf and I have been riding together several times over last coupla years. Finding time is biggest problem. Since we are all spread out, I thought each of us would pick a spot in our area to meet and swap around on a regular basis so everyone would host a get together. At least once a quarter. Last month , the three of us met at msr north of angleton at the races. It worked for the one day. Bout time to set up another get together. Jim2 is a tuber type guy as well. Buellerxt, Buewulf and I are uly peeps. Good to hear from you am looking forward to meeting you! | ||
| Sagehawk |
Wanted to share that another swap meet this coming sunday, 10th, is at the hawg stop bar grill in houston. Opens at 11 until 5ish. 5.00 entry fee. As of now, I'm planning on going. Holler if your interested, anyone! | ||
| Jim2 |
Do any of you Houston area Bueller's have the Kent Moore Sprocket Shaft Seal Installer Tool (or the equivalent likeness) I can rent/borrow? Here is a link to the Henrick thread showing pictures of the tool and his photo guide to using it. I will be picking up a new seal tomorrow morning. http://www.badweatherbikers.com/cgibin/discus/show .cgi?tpc=3842&post=592898#POST592898 Thanks, JiM2 | ||
| Sagehawk |
Sorry to miss your post as it is now today. 10,11,2016. I haven't had to do any work like that yet so no I don't have that tool. However, I have torque plates and a crank truing stand available. Don't ask. Just in right place at right time and have never used the stuff either. Take care and best wishes! | ||
| Jim2 |
I managed to have one made for me. I remember your post about the torque plates now that you mention them Picture of my oil seal tool: http://www.badweatherbikers.com/cgibin/discus/show .cgi?tpc=3842&post=2563402#POST2563402 | ||
| Sagehawk |
That looks sharp, dude! is that the correct installation direction? I always though that spring side went to pressure side. Industrial thought there. visited with dawiz50 yesterday and he and i are looking to get together soon. join in if you like! |
