| Author |
Message |
    
Chippy
| | Posted on Wednesday, September 09, 2009 - 10:53 am: | 
|
sign me up, scotty. tell me when you're ready...i'll have the 90min ipa in hand. yup, i have a homemade airbox gut.
just gotta check with my ol' man to get the truck. |
Scotty_j
| | Posted on Wednesday, September 09, 2009 - 11:27 am: |
|
Saturday morning-ish. Wife has drill this weekend so I'm off the leash. |
Tattoo72
| | Posted on Wednesday, September 09, 2009 - 12:24 pm: |
|
I do have a map stored somewhere for that set up on one of my computers, or a disc, or flash drive. I need to be more organized. I'll try to find it tonight. The factory race map is actually pretty good to use with the Jardine. I would run the race map and then do some data logging to fine tune it. Here is a good link for step by step data logging. http://www.buellxb.com/Buell-XB-Forum/Do-It-Yourse lf-Buell-Mods/ECMspy-megalog-tunning |
Scotty_j
| | Posted on Wednesday, September 09, 2009 - 03:26 pm: |
|
step by step data logging
On your own with that, Chip. |
Chippy
| | Posted on Wednesday, September 09, 2009 - 03:48 pm: |
|
Seein as I ain't got a laptop and a cable. Whatever map I can scrounge up will do. And I'll be grateful to have it. |
Tripp
| | Posted on Wednesday, September 09, 2009 - 04:14 pm: |
|
chip, got a line on a used but good stock ecm, and the torque(?) pegs front and back w/ only 100 or so miles on them. |
Tattoo72
| | Posted on Wednesday, September 09, 2009 - 05:04 pm: |
|
Scotty I emailed you the Jardine eeprom and the 07 race ecm eeprom. |
Chippy
| | Posted on Wednesday, September 09, 2009 - 05:51 pm: |
|
I'll take the pegs for sure, tripp. (that's what they call those 1125 jobbers?) |
03worc9r
| | Posted on Wednesday, September 09, 2009 - 06:07 pm: |
|
Jim, I need one of these done by the spring....
|
Chippy
| | Posted on Wednesday, September 09, 2009 - 06:26 pm: |
|
That thing looks weird. Like the front and rear exhaust enter from different sides, fight each other for a little while and then come out singing. Does it sing nice? |
Tattoo72
| | Posted on Wednesday, September 09, 2009 - 07:13 pm: |
|
Damn that thing is sweet look'n. Looks like it's all stainless steel. I'm sure that thing wasn't cheap to build. Looks like a flowmaster style muffler that feeds into a mini silencer. |
03worc9r
| | Posted on Wednesday, September 09, 2009 - 09:13 pm: |
|
Its the best looking pipe I have found, but the website is not is english. I am sure it is very pricey. It dont looked mass produced, lol.
|
Jpb
| | Posted on Wednesday, September 09, 2009 - 09:18 pm: |
|
Hey Chip...when you get done at Scotty's come up to my place...enjoy the party a while while you're up north... |
Chippy
| | Posted on Wednesday, September 09, 2009 - 09:35 pm: |
|
That's the plan broseph. I'm free till about 7. Got band practice then. |
Chippy
| | Posted on Wednesday, September 09, 2009 - 09:36 pm: |
|
That red is hawtt. |
Spdrxb
| | Posted on Wednesday, September 09, 2009 - 10:25 pm: |
|
Nice spelling dork UGh huh pmpmpmt ting spit that chew out! |
Backlash
| | Posted on Thursday, September 10, 2009 - 01:10 am: |
|
anyone know of a stronger drive belt than the stock sporty belt for a tuber??
snapped mine tonight. (2nd time, right about 7k miles on it) Im a bit pissed off at the ole girl and found myself looking at the new Ducatis online...
have to go into work early to get the truck (I work for a towing company thank goodness!!) and go collect her from the garage that was nice enough to let me park it there for the night.
No beer in the fridge either... dammit  |
Firebolteric_ma
| | Posted on Thursday, September 10, 2009 - 08:05 am: |
|
Chain.....
Belts are for pants.... |
Scott_in_nh
| | Posted on Thursday, September 10, 2009 - 08:28 am: |
|
Use whatever the newest PN is for a Uly belt.
I believe they came out with a new one within the last year.
This one came out right after I replaced mine with the last version, I would assume it is similar to in that it is much stiffer and needs to be run a little tighter or it jumps teeth when you launch....
Do not waste your money on another sporty belt! |
Scotty_j
| | Posted on Thursday, September 10, 2009 - 08:29 am: |
|
Got the EEPROM Tat; thanks.
See you on Sat, Jeep. I don't know if CJ is coming along; drill weekend. You gonna be in a wheelchair or on a Segway or somethin'?
**ALERT**
My wife decided she wants a new car. Since I'll probably get raped on the trade-in, I'll ask if any of you hose bags are interested in a 2006 Mazda 3, manual trans, 40,000 miles. It's got power everything, sun roof, in-dash 6 disc, fresh Michelins, runs like new. Gray. Kickass gas mileage. $9K. |
Spdrxb
| | Posted on Thursday, September 10, 2009 - 09:49 am: |
|
Anyone home and looking to ride this morn/afternoon? I'M leaving about 10:30 not sure where i'm going yet. |
Scotty_j
| | Posted on Thursday, September 10, 2009 - 10:53 am: |
|
Go west, young man, go west.
Anybody want to hit Rice-O-Rama in N. Brookfield on Sunday? I'm headed there after stuffing my face at Carl's. 9am.
(Message edited by scotty_j on September 10, 2009) |
Firebolteric_ma
| | Posted on Thursday, September 10, 2009 - 11:15 am: |
|
Looks like Chippy will be able to get on the track then...
Gonna be a fun day(s).
|
03worc9r
| | Posted on Thursday, September 10, 2009 - 11:20 am: |
|
Scotty, I'll see you at carls.
Anyone hitting the Bass pro shop tonight? car / bike show. |
Firebolteric_ma
| | Posted on Thursday, September 10, 2009 - 11:25 am: |
|
Hitting 116 is a hoot, went out there a couple months ago. Them roads are VERY fun indeed out that way!
Jeff is going.... I'm Out!
Wait
Jp isn't going.... Back IN!
(Message edited by firebolteric_ma on September 10, 2009) |
Tattoo72
| | Posted on Thursday, September 10, 2009 - 02:20 pm: |
|
I'll be there Sunday. Finished putting everything back on the bike and took it for a nice ride last night. No leaks and nothing fell off.  |
Chippy
| | Posted on Thursday, September 10, 2009 - 02:30 pm: |
|
d'oh! i think sunday is out...which is a bummer cuz saturday ain't shaping up to be too pretty...and yes, if all goes well, i may just get to the track on the 30th.
boos, that's if your offer still stands on the leathers. (i wear a 44 suit if that helps) |
Scotty_j
| | Posted on Thursday, September 10, 2009 - 02:39 pm: |
|
Chip- if you can't get the bike out my way I could just slide you the ECM. I could program it through my wife's XB9. The TPS will probably be all effed up, but if you're tight for time it's an option...
And let me get this right: You're trying to get into Erik's pants? GAY! |
Chippy
| | Posted on Thursday, September 10, 2009 - 02:53 pm: |
|
i got nothing but time, sister. i'll see you saturday morning.
and yes, i'm hoping to get into erik's pants. cuz i just bought my first track day sucka!!!!!!! |
Firebolteric_ma
| | Posted on Thursday, September 10, 2009 - 03:46 pm: |
|
Scotty is to scared to go. he only likes the posing in leathers part of all this. He does have a cute azz though.
|
NEBO (New England Bike Owners) »
NEBO Archives 001 »
Archive through September 10, 2009