G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Storm Fronts: Buell Groups, Clubs, & Events » 065 CBR (Colorado Buell Riders) » Technical question

« Previous Next »

Author Message   Dlaubscher Posted on Thursday, January 29, 2009 - 09:06 pm:        Hi all, I have an issue. I put my 01 M2 on the lift because I have a loud noise coming from the right side. Can't tell if it's grinding or what. It's only there when I'm in motion and after a block or so. I put it on a lift to run it in place so I can do some snooping. Now this is a couple of months of non-running. She started up fine but as soon as I put her in gear, BLAM through the tailpipe and she shut down. I let it run for a few minutes more and tried it again. Same result. I get a backfire and then stall. Tried keeping the revs high and feathering the clutch. Same result. Can't run it in gear. Any ideas?   F_skinner Posted on Thursday, January 29, 2009 - 09:17 pm:        Dave, you might want to post this in the old school section or the KV as many people do not check the individual storm fronts. Does it happen when you let the clutch out or when it is put in gear? How does the clutch feel? Is it real stiff or normal or very easy? It sounds like tranny problem.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: