| Author |
Message |
    
Xbullet
| | Posted on Tuesday, April 17, 2007 - 10:25 pm: | 
|
This bike started off as an '06 XB9SX. You know the one...with the handguards and all... yeah. butchered it. hacked it, cut it, did all i could to "ruin it."
First off....this is how the bike looked when i met up with the 3%ers.
|
Xbullet
| | Posted on Tuesday, April 17, 2007 - 10:27 pm: |
|
Then... i got her back together with the stuntex clip ons.
how ya like the UL motor back there behind it?
(Message edited by xbullet on April 17, 2007) |
Xbullet
| | Posted on Tuesday, April 17, 2007 - 10:39 pm: |
|
Now completes phase1.
clipons
hackjob to front electrical housing (to make room for clip ons)
all logos/stickers/etc. gone
traction pegs front and rear
black subframe
cheesegraterectomy
belt-guard-ectomy
black passenger peg mounts ('03 for shorter length)
low seat
k&n air filter
ugly blue pedals
(Message edited by xbullet on April 17, 2007)
(Message edited by xbullet on April 17, 2007) |
Xbullet
| | Posted on Tuesday, April 17, 2007 - 10:48 pm: |
|
PHASE 2
Fresh from the Buell Barn just a week before MBIV
-HUGE thanx to New12R, BraveAngel, Shred, Glitch, SilverBullet, StealthXB, Smokescreen, MissBehavin'....whew! i hope i didn't leave anyone out!
R clamp
modified electrical housing in the front
used the stock S clutch cable.
painted top and bottom triple trees black
painted front axle mounts black
ugly blue grips to go with ugly blue pedals
Pirelli SuperCorsas
Micron exhaust
painted the inside of the Kick Ash plastics with black paint.
and just a week after MBIV i put on the XBRR master cylinder setup and here's what we got...
(Message edited by xbullet on April 17, 2007)
(Message edited by xbullet on April 17, 2007)
(Message edited by xbullet on April 17, 2007) |
Xbullet
| | Posted on Tuesday, April 17, 2007 - 10:51 pm: |
|
|
Xbullet
| | Posted on Tuesday, April 17, 2007 - 10:55 pm: |
|
got the micron and ceramic coated it. then banged it up.... (pinball moment..)
Damn guardrails...
(Message edited by xbullet on April 17, 2007) |
Xbullet
| | Posted on Tuesday, April 17, 2007 - 11:01 pm: |
|
Got my corbin in....sure does look nice except for that HUGE gap. what gives?
|
Xbullet
| | Posted on Tuesday, April 17, 2007 - 11:05 pm: |
|
Here she is just moments before we joined the Flip Nipple Club...
I know she needs a bath. will post Phase 3 once she's reassembled.
Scheduled to appear:
-shorty levers (homemade, of course)
-stock pegs fr. and rr. painted black
-buell torque grips
-HVMP bar ends
-DHM sliders (too little too late...)
*****Sanchez will notice the demise of the ugly blue pedals and grips*****
(Message edited by xbullet on April 17, 2007) |
Xbullet
| | Posted on Tuesday, June 19, 2007 - 05:22 pm: |
|
little note...
phase III now includes factory buell race muffler and factory buell race ecm.
gonna ceramic coat the stock header the same black as the micron. pics on the way... |
|
3% Bragging Rights Club »
3%er's Modifications »
Bullet's Mods