G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Pitbulltuff Posted on Thursday, February 10, 2005 - 09:13 pm:        XB12R windshield and probably bars. How hard and how much to put on XB12S ? I did a search but could not find what I was looking for. Reason I'm asking is I found a brand new 12S about $2000 less then I can get the 12R for. so any help would be great.   Lpd22 Posted on Thursday, February 10, 2005 - 10:17 pm:        Talk to dave to get the prices.   Wyckedflesh Posted on Thursday, February 10, 2005 - 11:01 pm:        Money wise it should be less then $1000 to do. You will need the following: Top triple from an R left and right bars from an R fairing windscreen ignition switch assembly from an R fairing support bracket headlight assembly (bracket and 2 lights) about 6 torx screws for various connections under the bracket. Front brake line from an R service Manual for an R for reference you will need to fabricate some spacers for the headlight bracket since on an R that is where the ECM sits. <----view profile image   Pitbulltuff Posted on Friday, February 11, 2005 - 02:21 am:        Thanks Wycked.Ive been browsing the archives for a few hours now. and I found some of your other posts very helpful. I will let you know what I end up with. Thanks again.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: