G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Thepup Posted on Thursday, January 06, 2005 - 06:30 pm:        does anyone know how to read trouble codes on a XB,engine light came on and I would like to find out what it might be.   Chainsaw Posted on Thursday, January 06, 2005 - 08:11 pm:        Yes. Make a jumper wire, bullet connectors work if you enlarge the hole a bit. Connect the jumper to the #1 and #2 terminals on the data link (marked on the back). Ignition ON, run switch ON, wait 8 seconds, engine light will blink. Trouble code is preceded by 6 rapid flashes, then a 2 second pause. First digit blinks, 2 second pause, then 2nd digit. Multiple codes blinked after another 2 second pause. If a code repeats, you have them all. code 11: TPS 13: O2 sensor 14: Engine temp sensor 15: IAT sensor 16: Battery Voltage 23: Front injector 24: Front ignition coil 25: Rear ignition coil 32: rear injector 33: Fuel pump 35: Tach 36: Fan 44: Bank Angle sensor 52,53,54,55: ECM failure 56: Cam sync failure. Good luck!   Chainsaw Posted on Thursday, January 06, 2005 - 08:12 pm:        If you have the service manual, this procedure is on Page 4-8

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: