G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Xbolt12 Posted on Sunday, December 19, 2004 - 08:31 pm:        Anyone using the PitBull front stand (newstand) lift that uses the bottom of triple clamp to lift? I've got one and tried it with the #2 pin and it was a sloppy fit. Used the #7 called for on xb9's and it was so loose a fit I would have cracked my fairing if I had lifted the bike up all the way. I have an '04 xb12r. Thanks xbolt12   Daves Posted on Sunday, December 19, 2004 - 09:01 pm:        XBs use the #2 pin. It is a little loose but works fine.   Xbolt12 Posted on Sunday, December 19, 2004 - 09:16 pm:        Thanks. Wonder why they specify a #7? I'll call them Monday and let them know they need to change their docs. xbolt12   Daves Posted on Sunday, December 19, 2004 - 10:04 pm:        Must be a mis print. The chart I have says #2 pin.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: