| Author | Message | ||
     Tatsu |
I saw a guy that replaced his windscreen bolts with Spikes. I liked the look and kinda wanted to do the same. Can anyone tell me the size and length of the stock bolts that hold the windscreen in place? | ||
| Lpd22 |
I want to say 10. Dont quote me on it though. Im not positive but I think thats what I remember. | ||
| Court |
There are, if I am understanding what you are saying, 2 different sizes. The four (4) small one (I think these are the outboard 4) are: Part No. AN1005.3CBBL - they are SCREW, 10-24 x 1/2 socket head, zinc. The two (2) larger ones (these appear to be the two "lower, inboard at the bottom) are: Part No. AN1010.3FSS - they are SCREW, 10-24 x 1-1/1/4 button head, stainless steel. They use the same (quantity of 6) Nylon washers which are CB009.02A8 and the well nuts (6) are M0703.02A8. I hope this helps. Court (Message edited by court on December 13, 2004) | ||
| Court |
 | ||
| Tatsu |
Excellent! Thanks Court! I'm going to set working on this project. I'll take pictures once I get it all set. | ||
| Buells Rule! (Dyna in disguise)  |
Just put 1 big honking one right in the center. Make it look like a Unicorn, they are related to the Pegasus arent they? | ||
| Tatsu |
Ummm no... the spikes are about 1 inch in length. I will send a pic when done. |
