G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » XBoard » Buell XBoard Archives » Archive through December 20, 2004 » XB9R Air Box Modification « Previous Next »

  Thread Last Poster Posts Pages Last Post
Archive through December 11, 2004Mou5e30 12-11-04  05:15 pm
         

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Bigeasy
Posted on Sunday, December 12, 2004 - 02:55 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

xb9er,
I swiss cheesed my xb12s awhile ago and I really wasnt pleased with the results. After seeing your pic I decided to go all the way and remove the top of the air box with good advice from odie. Then I did the exact same as in your pic. WOW what a kick ride! I dont know if it is the 50 degree weather here (new orleans) or what but man she pulls hard!

It took me about 2 solid hours with my Dremel and a pair of needle nose to grab the excess plastic. All said and done, really wasnt that hard if you take your time and use the sandpaper you mentioned. I still need to buy the steel mesh though. Anyways thanks for the great idea and to odie for help with the airbox. I was going to add the techlision but I love the way it runs and pulls now so I think I will leave it as is. Thanks again!

Art
Top of pagePrevious messageNext messageBottom of page Link to this message

Odie


Posted on Sunday, December 12, 2004 - 02:59 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Big- anytime.....Odie
Top of pagePrevious messageNext messageBottom of page Link to this message

Barkandbite


Posted on Sunday, December 12, 2004 - 03:09 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Bigeasy:

Imagine what she'll pull like if you have the Techlusion! More air + more fuel = BIGGER grins!

You seriously should consider the TFI. It kicks .

Chris
Top of pagePrevious messageNext messageBottom of page Link to this message

U4euh
Posted on Sunday, December 12, 2004 - 03:41 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Only question I have, and this has been on my mind since I seen Hogs mods(lol), is what about getting caught in a thunderstorm? I don't intend on riding in the rain, but sometimes being a hundred or so miles from home doesn't give me a choice. Wondering what ill effects these mods would have. I really do like both mods, they look lean and mean, adds more mystery and appeal to the "BUELL" thing.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ingemar


Posted on Sunday, December 12, 2004 - 04:05 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

My sportster had an open airfilter behind a hamcan. Pretty much the same as some of the older tubers have.

I've been riding that thing in HEAVY rain, and it was only once it was running a little rough. These engines don't seem to be bothered much by it.

I'm not sure, but only Hogs will be able to tell. If he doesn't have a problem, none of us will ; )
Top of pagePrevious messageNext messageBottom of page Link to this message

Hogs
Posted on Sunday, December 12, 2004 - 06:02 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Well wish I could answer that, but I have not got caught in the rain with it as of yet, But I can tell ya been caught in the rain on my 103 inch 5" bad stroker with a 4 " open stack (no filter) and really never had any plms. with that so can`t see with running the big K&N (sprayed lightly with oil) one wd. have any plms. I mean how wd. any water get in????
Top of pagePrevious messageNext messageBottom of page Link to this message

Coldwthrrider


Posted on Sunday, December 12, 2004 - 11:47 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Nice job on the mods you two, I may try the up front holes next year....I don't trust my (un)steady hands with the side vents like Hogs did but that looks very trick!

If you're worried about rain, keep a small amount of duct tape rolled up on a golf pencil in your under your seat storage. That can be your rain proof airbox sealant if needed. Of course then you'll need some goo-gone to clean it off the next day.
Top of pagePrevious messageNext messageBottom of page Link to this message

Lpd22
Posted on Monday, December 13, 2004 - 08:57 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

What about when you wash the bike? If?
Top of pagePrevious messageNext messageBottom of page Link to this message

Maxima4xu2
Posted on Wednesday, December 15, 2004 - 04:08 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

ok i decided to do the front of the box screen thing too but..... why spend 30 bucks for some expanded aluminum cmon go to ace hardware like i did and violla 6"x20' of expanded aluminum for 4 bucks hehe
Top of pagePrevious messageNext messageBottom of page Link to this message

Al_lighton


Posted on Wednesday, December 15, 2004 - 11:22 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I don't think water is a big deal at all. I've ridden my Buell race oval equipped S3 in torrential downpours and that air filter is pretty much hanging out in the open, nary a cough. In fact, after my wreck up on Mt Evans at the Colorado Buell gathering in 2001, I'd scraped half my air filter off the bike, and then afterwards rode back to Breckenridge thru the heaviest rain I've ever ridden in (complete with mudslides, filled my tankbag to the brim with water literally in minutes), and the bike ran just fine with no ill effects.

For the water to be ingested thru the XB induction system, it has to get thru the air filter and down the velocity stack...I doubt much gets there as much of anything more than a mist. I'd frankly be more worried about it being parked in pouring rain than riding in it.

I would, however, go to the back right corner of the lower airbox and drill a small weep hole there just to keep the airbox from partially filling with water.

YMMV, but I wouldn't be sweating it.

Al
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration