G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Johnk3 Posted on Saturday, December 04, 2004 - 02:13 pm:        I'm going to be doing some work this month on my xb9r (heads, and 1050 kit). I'm possibly going to change the cams out for some redshift 585 grinds. Will I need to do any clearancing in the case to get these in? Looks pretty straightforward to pivot the motor down. Is that pivot down going to provide enough room for all the top end work?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: