G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Smashman Posted on Sunday, September 13, 2015 - 01:28 pm:        I needed to install a new engine in my Ulysses XT. After reading it was determined that all the XB engines will work. The install has gone OK except for the kickstand mount... The Uly uses a 3 hole bracket instead of 2. Can anyone comment about how well the Ulysses kickstand works if the third bolt hole is cut off the bracket?   Teeps Posted on Sunday, September 13, 2015 - 07:53 pm:        The '06/'07 Ulysses' used 2 bolts to attach the side stand bracket. There was a recall on the side stand, which included the bolts. Long as the bolts are properly torqued it should not be a problem. http://www.badweatherbikers.com/buell/messages/142 838/287535.html http://www.badweatherbikers.com/buell/messages/142 838/370519.html

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: