| Author | Message | ||
     Dmurphy |
So weird enough problem here. I was resetting my TPS and when I was adjusting the idle speed back to normal after completing the TPS reset, the adjustment knob for the idle spun off the spring/cable that connects back to the fuel body. I have no clue how the adjustment knob connected to the spring but at this point it won't go back on so I am a bit screwed in that I can't get the idle to set back to normal. I can't find any part information to replace this or even if I did I can't tell how to remove the old one and put on the new one. I can look at removing some more parts to get down to where the idle adjustment connects to the fuel assembly but am hopeful somehow has this information. Any information will be helpful. Thanks. | ||
| Scottykrein |
I did that once... It's easy to see what happened if you pull off the air box base plate, you'll see where it screws in. If it is broken and not just un screwed look here. http://americansportbike.com/newdir/Item/17558 | ||
| Dmurphy |
Thanks for the information. I previously looked at americansportbike but couldn't find the part. thank you for the link. |
