| Author | Message | ||
     Desotonorsocal |
So on my way to work this morning, the clutch 'pivot bolt' (not sure what it's actually called) loosened and disappeared on me in 5th gear. Luckily these brutes can run in any gear or I'd have been dead in the water. I googled clutch bolts but everything seems to be for the hand levers. I'm near Mission Motorsports (Irvine, CA) and hoping I can get a ride there during lunch and find a permanent replacement. (HD of Irvine is also close by). Anyway, I can't find what bolt this is, or even at least the thread size, in the event that I'm stuck with a Pepboys temporary fix to get home. Can someone identify the bolt & thread size, and/or the part number? Sorry I don't have a better photo. 2006 XB9R Lightning. Thanks in advance! -D  | ||
| Brother_in_buells |
photo is not showing ,but is it this bolt? http://twinmotorcycles.nl/webshop/artikel.asp?guid =YXHFSC&aid=1253&cid=5371&s= | ||
| Brother_in_buells |
eh  now i can see it You mean this-one http://www.twinmotorcycles.nl/webshop/artikel.asp? guid=YXHFSC&aid=1184&cid=54&s= CA0015.02A8, Flange head bolt, 5/16-18 1,1/4 gr8. I think it is the same as the bolts that holds the heim joints to motor and frame. (Message edited by Brother in buells on April 21, 2014) (Message edited by Brother in buells on April 21, 2014) | ||
| Desotonorsocal |
@Brother_in_buells, That appears to be it! Shouldn't be too hard to grab one of those at the local hardware store. I'm guessing I should get a couple of shims/washers for either side of the assembly, and some loctite, lol. Thanks again! | ||
| Desotonorsocal |
Went to H-D in Irvine to order the parts- 02a8 is indeed the appropriate flange head bolt, but also needed to get Bearing, pedal, plastic (x2) N0513.T, & Sleeve, shift/brake lever N0599.02A8A for anyone else that may lose bits on the road! :P |
