| Author | Message | ||
     Lonestarbeer |
I have a 2005 Firebolt. I want it to look just like the bike I have pictured here. It has the bigger fairing like mine but the shorter tail section and it has a lower saddle. How so I achieve this. Exactly what tail section and seat is that?  | ||
| Brother_in_buells |
Looking at the picture ,i think it is a lightning tail with risers and a low seat with a seat cover on. Why not asking the owner on xb.com? | ||
| Lonestarbeer |
I can't find the post. | ||
| Brother_in_buells |
A okay It also could be a lightning with a lower mounted firebolt fairing (i see now fuse boxes on near the mph/rpm clocks) | ||
| Brother_in_buells |
Here it is! http://www.buellxb.com/Buell-XB-Forum/Buell-Lightn ing-XB12S-XB12Ss-CityX-XB12Scg/Project-Complete | ||
| Lonestarbeer |
Wow awesome thank you! Yep, its an XB12S. So that's a Lightening with a Firebolt fairing. Back to the drawing board. I reeeeeaally want my bike to have THAT look. Thanks guys! | ||
| Brother_in_buells |
No problem ,it was a lucky guess. You have to find a complete lightning tail and a lightning upper triple clamp and also make a mount to position the firebolt fairing a bit lower ,he did lower the fork legs through the triples instead lowering the fairing. btw: a tailsection from a ss does not fit on the early xb's Good luck with the conversion! | ||
| Brother_in_buells |
Here is more, http://www.fat300customcycles.com/gallery.cfm?getc ategory=yes&id=233&category=Buell%20240mm%20Kits |
