| Author | Message | ||
     Easyrider |
Buell XB 9/12 Twin Motorcycles developed Chin spoiler brackets For all Buell XB 9/12 R/S models to mount your Chin spoiler. This is a good solution when your after market exhaust has no mounting points for the chin spoiler. http://www.twinmotorcycles.nl/webshop/artikel.asp? guid=YXHFSC&aid=6462&cid=0&s=TM004&a=&aname=Buell_ XB_912_TM_Chin_spoiler_brackets_ | ||
| Greg_e |
The price looks pretty reasonable for these, now if we could only get sound level measurements for you torque hammer muffler we might be all set. | ||
| Easyrider |
Greg_e you can here them here: idle: http://www.youtube.com/watch?v=2upUrEl-I_w WOT: http://www.youtube.com/watch?v=2SnVxp7lMD8 cruise: http://www.youtube.com/watch?v=FxCQOmGwOjk acceleration: http://www.youtube.com/watch?v=x_6_vgezP5E we have a lot of sound clips. It is wen you ride the bike normal one of the most quit aftermarket systems in the market Look here too:http://www.twinmotorcycles.nl/movies.asp?cid=3&aid=138 (Message edited by easyrider on February 22, 2014) | ||
| 50dro |
We still plan to perform a comprehensive and comparative test on the loudness of the Torque Hammer Exhaust and some comparable systems that many of you are familiar with. Up until a break in the weather today, it's been very cold and snowy. Once we can count on a dry day to do all the tests and exhaust swaps (testing must be done outdoors), we'll be doing the SPL testing and will be sure to post up the results on the forum for your review. Thanks for being patient. If we can help in any other way, please let us know. 5-0dro www.5-0dro.com | ||
| Sifo |
Very similar to another Mfg's design that I had on my XB. Worked great until engine vibration caused the chin spoiler to fail because of a lack of support at the front like the stock muffler provides. Solve that, and you will have a better mouse trap.   | ||
| Greg_e |
Needs a strap across the front with two more fastener points, shouldn't be that hard to create. |
