G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Papas Posted on Sunday, September 15, 2013 - 09:09 pm:        I am short on time so a search and investigation is in the future BUT....my STT has had a constant check engine light on for a hundred miles or so. First 50 or so it was intermitant, now it's solid. Bike's running good except if I turn it off (like for gas) and 3-6 minutes of sputter/cough, then smooth again. What's the best way to read the error codes, besides the jumper cable on the plug? Will the ECMspy cable give me a readout on my laptop? TIA steve   Froggy Posted on Sunday, September 15, 2013 - 09:17 pm:        Yes ECMspy will read the codes and help you figure out what is going on   Papas Posted on Sunday, September 15, 2013 - 09:36 pm:        thanks!!!! this is what I thought. off to ebay! steve   Greg_e Posted on Monday, September 16, 2013 - 11:34 am:        I'd guess defective O2 sensor letting too much fuel in and fouling the plugs.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: