G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Nik Posted on Saturday, June 30, 2012 - 03:47 pm:        I'm installing a 2007 xb9 engine into my 2005. What are good things to replace while I'm in there? New gaskets, header studs etc? I'd like to just put in one big order to American Sport Bike and get it done. It's been parked too long!!   Ulynut Posted on Saturday, June 30, 2012 - 04:10 pm:        Intake boots....maybe. No...just inspect them. If they're good, run em   Greg_e Posted on Saturday, June 30, 2012 - 10:55 pm:        Front and rear engine mounts, oil and filter, O rings on drain plugs, check clutch cable and replace if needed, spark plugs, PCV seals if needed, clutch inspection cover gasket. Other gaskets if you have a leak or just want to do work would be rocker box gaskets. Maybe pull the oil pump and check the drive gears, you would then need the oil pump gasket. If you really want to get into it, change the fuel pump strainer and fuel filter. Probably need new pump O rings for the body and fuel line. Lube throttle cables.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: