G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Darth_buell Posted on Tuesday, June 05, 2012 - 12:02 pm:        did the search and know that the nut and bolt modification is the best chance at getting a good view, I just don't know how to get the rivots out. I'm guessing that they will spin when drilled. Anyone have the secret?   Terrys1980 Posted on Tuesday, June 05, 2012 - 01:18 pm:        Use a small screwdriver to pry and hold pressure while drilling.   Natexlh1000 Posted on Wednesday, June 06, 2012 - 07:34 pm:        I have added and removed my share of rivets. The technique you need is: Start drilling straight in the center of the rivet. WHEN it does start to spin, angle the drill about 20 degrees. Each revolution of the rivet bites another chunk out.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: