G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Expatriate00 Posted on Tuesday, April 10, 2012 - 08:05 pm:        I was able to grab a rear fender eliminator for my XB9S a couple of years back and I'm tired of it sitting around my garage and figure its time to mount it up. I'm a bit befuddled about the mounting position of the turn signals though. There are no mounting holes for them on the new tail piece, and integrated turn signals in the taillight are a gray area legally in Indiana. I was wondering if a few of you would post a few pics of where you mounted yours. Also, the load resistors involved for LED turn signals should be what OHM/ wattage? I saw somewhere a suggestion of 6ohm/50watts for 12v systems. That sounds about right to me but its best to get suggestions from those who've done the modification. Pics and suggestions are greatly appreciated.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: