G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Canxb Posted on Friday, February 03, 2012 - 06:03 pm:        So the stage is set for an upgrade before the snow has all melted away. Parts are slowly coming in and here are the details. Bike: 2003 Xb9R Upgrades: Drummer SS K&N Air filter XB Open Air Box Conversion kit from American Sport Bike Catch can and breather rerouting My question is in regards to the ignition. I was thinking of calling EBR to get an ignition module for my bike that is programed for the Drummer. What I have heard is that I will need to do a TPS reset and an adjustment to my idle. Is this true? If so is it difficult and are there directions written up somewhere on how to go about doing all this. Anything else I may need to watch out for? Thank you for any help or direction anyone has to offer.   Terrys1980 Posted on Friday, February 03, 2012 - 06:30 pm:        Your best bet would be to get Drummer maps from Kevin over at KDFab.com. EBR does not have specific maps for the XB9's. You will need a ECMSpy cable to burn the maps and to do a TPS reset. The instructions are found in the tuning guide HERE.   Canxb Posted on Friday, February 03, 2012 - 06:37 pm:        Terrys1980 I thought EBR offered ECM's with maps for several different exhaust systems for XB's and later? I may need to get a hold of Kevin and see what he says.   Terrys1980 Posted on Friday, February 03, 2012 - 06:48 pm:        IF they do it has never been listed on their website. They do however have specific maps for the 12 and 1125.   Canxb Posted on Friday, February 03, 2012 - 07:08 pm:        Here is what I was looking at. http://www.erikbuellracing.com/store/models/xb9/xb 9-model-ddfi-2-preprogrammed-ecm.html   Froggy Posted on Friday, February 03, 2012 - 07:19 pm:        quote: NOTE: The ECM is shipped with a non customizable calibration, and no options are available. Which means they only have one setup available. Will it still work? Yes, but you would be better off getting the Drummer map from Kevin.   Terrys1980 Posted on Friday, February 03, 2012 - 07:22 pm:        You get 2 options for the XB9 and almost 20 different configurations for the XB12. I would be inclined to say the ECM they are offering for the 9 has the same race maps from the race ECM that was sold when Buell was still alive. I have those race maps. I would at least try the maps from Kevin before spending $305.   Canxb Posted on Friday, February 03, 2012 - 07:52 pm:        I have an email in to Kevin. I will see what he says. Right now I have a Buell race ECM. Would that be the same as what EBR is offering then?   Danair Posted on Friday, February 03, 2012 - 10:58 pm:        Is a race ecm compatible with a Uly and if so is it a waste with a stock exhaust?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: