G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Lpd22 Posted on Thursday, December 15, 2011 - 09:22 pm:        So, finally after messing around all summer trying to get the bike running again and putting the new headlight on. She lives and better than ever!   Terrys1980 Posted on Thursday, December 15, 2011 - 09:31 pm:        Looking good! I like the white on black.   Joel9 Posted on Thursday, December 15, 2011 - 10:09 pm:        What front brake rotor is that? looks cool.   Terrys1980 Posted on Thursday, December 15, 2011 - 10:15 pm:        His front and rear rotors are custom cut by a machine shop in Savannah, GA. quote: The front and rear rotors I had professionally cut by a machinist in Savannah, GA the company is called Quality Machine (912-232-5680) they also cut the rotors on my R1. They do a great job and its ten times cheaper than wave rotors. There is no braking advantage however. They are more for looks than anything.   Lpd22 Posted on Thursday, December 15, 2011 - 10:19 pm:        Thanks Terry! Right on   Littlebuggles Posted on Friday, December 16, 2011 - 07:15 am:        Looks great!   05xb12r Posted on Friday, December 16, 2011 - 09:52 am:        Digging the headlight setup   Argentcorvid Posted on Friday, December 16, 2011 - 12:53 pm:        Yeah, you're definitely going to need to post some more info on that headlight setup.   Lpd22 Posted on Friday, December 16, 2011 - 01:22 pm:        It's the Fire Hesa Headlight unit. It comes in black or chrome and the cheapest I found it for was $260 from streetfightersinc.com. I also put a 6000k HID in the low beam ( it's super bright). And the high beam is a silver star 55w from autozone. There is a built in LED Halo around the high beam that looks cool at night. The headlight mounts I got from Aztec 8 out of FL great mounts. I also used them for the speedo mount. I drilled holes in the headlight mount so I could mount those clear flush mount blinkers.   Gunut75 Posted on Friday, December 16, 2011 - 02:17 pm:        I think that looks great! Nice work.   Cityxruss Posted on Saturday, December 17, 2011 - 02:17 am:        I like it from the front forks back to the rear tire. The white plastics, silver frame, blacked-out engine - it looks really good. Sorry but I'm not seeing the beauty of the headlight.   U4euh Posted on Tuesday, December 20, 2011 - 10:19 am:        Caleb, do you travel through Aberdeen, NC at all? I've seen a bike that looks very similar to yours very often. But the rider seems to be just passing through town as I've always had to spin a loop and try to catch him. Never works out though due to all the silver hairs in this town!!! If its you, shoot me a PM   Lpd22 Posted on Tuesday, December 20, 2011 - 12:53 pm:        I pm d you   Erwin8r Posted on Sunday, December 25, 2011 - 09:52 pm:        I like it--it looks nimble and mean; like a Buell should...   Foximus Posted on Tuesday, December 27, 2011 - 11:34 am:        Oh man.... Ohhhh man. I want that front rotor bad. How much did it cost? Looks like you did something similar to my headlight I built. I've always been a fan of vertical offsets.   Lpd22 Posted on Tuesday, December 27, 2011 - 11:58 am:        It ran me around $65. Your bike looks good! I'm a fan of the verticals   Foximus Posted on Tuesday, December 27, 2011 - 12:11 pm:        is it cut from scratch, or you brought him your rotor to be cut? Does he balance it after, or just assumes the cuts are in perfect radial symmetry?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: