G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Hogs Posted on Friday, September 16, 2011 - 10:08 pm:        Hey Guys new to these 2008/2009`s Ecms.... How does one go about resetting the TPS and say APV with the Erik Buell Racing Race or stock ECm`s for that matter? I take it with the Erik Buell Racing ECM acts the same as the Stock as far as APV and TPS rests??? Though I don`t know how to do either at this moment... ( well I`ll correct that, got an ideal on the stock ECM not sure about the APV part of it though ) Thanks for the INFO... (Message edited by hogs on September 16, 2011)   Froggy Posted on Friday, September 16, 2011 - 10:24 pm:        It comes with instructions, TPS reset works the same way as the stock ECM. No need for a AFV reset. (I'm assuming that's what you meant by APV)   Hogs Posted on Friday, September 16, 2011 - 10:33 pm:        Thanks froggy,YEah thats what I meant... So there is no reset for that or having to ride for like that 15 mins. over 3000 rpms on these 08 and up?   Froggy Posted on Saturday, September 17, 2011 - 12:09 am:        Just like every other Buell with fuel injection, it will constantly adjust the AFV as needed while you ride within the closed loop parameters. You don't have to do anything other than enjoy the ride. On the 08+ bikes, you should let it idle a few minutes after installing the new ECM, the idle is computer controlled, so it will take a little bit of time for it to calibrate itself to the bikes idle control valve.   Hogs Posted on Saturday, September 17, 2011 - 12:17 am:        Thanks Froggy ICV its called new for the 08`s and up then   Froggy Posted on Saturday, September 17, 2011 - 12:58 am:        IAC, Idle Air Control (and its a valve with a stepper motor)   Hogs Posted on Saturday, September 17, 2011 - 09:10 am:        Thanks Pal...   Hogs Posted on Sunday, September 18, 2011 - 07:57 pm:        Hmmm So,How does one set the idle say on the 09 models?   Froggy Posted on Sunday, September 18, 2011 - 08:57 pm:        The ecm does that for you.   Hogs Posted on Sunday, September 18, 2011 - 09:03 pm:        Interesting Froggy, but for some reason takes 3 to 5 mins and idles at 2000 rpms there abouts , not sure what thats all about,Never did it with the stock ecm....Hmmmm   Froggy Posted on Sunday, September 18, 2011 - 09:41 pm:        Functioning as intended   Hogs Posted on Sunday, September 18, 2011 - 09:56 pm:        Well thats Sucks!   Froggy Posted on Sunday, September 18, 2011 - 10:11 pm:        According to Erik Buell Racing, it is better for the bike. I forgot the details as to why.   Blake Posted on Monday, September 19, 2011 - 05:57 pm:        Try another tps reset. Mine did that too Hogs, but a subsequent reset seemed to drop the fast idle a bit lower, not near as much shaking.   Spacecapsule1 Posted on Tuesday, September 20, 2011 - 10:13 am:        ...tps reset hot or cold? does it matter?   Hogs Posted on Tuesday, September 20, 2011 - 11:35 am:        I wd. say always up to operating temps... And Thanks Blake will give that a try when My son gets back.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: