G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Wjcunning Posted on Tuesday, July 26, 2011 - 12:26 am:        Dang. Replaced my 06 Uly voltage regulator. The new regulator came with a new 77 plug, this one is a Deutsch connector (old one was a Packard). OK, there are only two wires on the 77 bike plug, one red, one black....but the voltage regulator wires are both black. Anybody know which lead the red wire goes to? Ohm check anybody?   Hughlysses Posted on Tuesday, July 26, 2011 - 06:06 am:        IIRC, one of the wires on each connector goes to ground. Get an ohmmeter and check. You can also verify which wire connects to the red wire via the old 77 connector on your old VR, mark it, and install the new 77 connector so it's the same polarity. Check the Big, Bad, & Dirty forum; this question has been posted there more than once.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: