Author |
Message |
Firefighter57023
| Posted on Saturday, July 09, 2011 - 10:00 pm: |
|
Now that I have the cap locks off, Sorry. I'm looking in to buying the fender eliminator from sport bike lights with the led turn signals and led plate light. I didn't know if there was anything else I needed to make it the set up work. Or is it a wire it and go setup. Any help would be appreciated thanks. |
Dhays1775
| Posted on Saturday, July 09, 2011 - 11:24 pm: |
|
I would imagine that the kit is an easy remove and install, but I have no experience with this kit. I do know that anything from Al at American Sport Bike will be top notch and most likely plug and play. Either way, let us know what you do. Pictures are always welcome!!! |
Boney95
| Posted on Sunday, July 10, 2011 - 02:13 am: |
|
If I were you...I'd send in my tail to Odie, and have him chop it. Then buy an integrated tail light from XBlights. Keep it in house bro. |
Boney95
| Posted on Sunday, July 10, 2011 - 02:17 am: |
|
Then you'd need to buy an LED flasher from AmericanSportBike, to get your flash rate back to normal. |
|