| Author | Message | ||
     Kevinfromwebb |
Hey, the fittings on my lines from the oil cooler are leaking, any tricks to keep them from leaking??? It's not the oil cooler end but the other, compression fitting end... Kevin | ||
| Kaudette |
Same problem on mine - I'm taking it to the dealer this week to have the front motor mount changed and will let you know if they found a fix. btw 12S | ||
| Bads1 |
Front motor mount???? What happened or wrong??? | ||
| Kaudette |
The Isolator is toast - was after 800 miles so they are swapping out the front mount & isolator. I don't know why they are doing this but I've learned to stop asking questions a while back with this dealership... | ||
| Kevinfromwebb |
Ken, let us know what they come up with... I went ahead and took mine in today.I'll let yall know what they come up with. They said they wouldn't be able to look at it until wednesday or thursday. Oh well, I'm going out of town to visit family anyway... Wanted to ride the bike but... &$#@!$$%#%$... Kevin | ||
| Bads1 |
Can you see visibly that its toasted?? | ||
| R1DynaSquid |
There are pics posted here somewhere of a good vs a bad front isolator. Actually pretty easy to see the difference. | ||
| Bads1 |
Yeah I remember that but to lazy to find. | ||
| Lovematt |
Basically if you look at the mount for the front isolator straight on with one eyeball on either side of the bolt, the empty space between the top and bottom should be about the same or slightly more at the bottom. If there is any rubber sticking out or the bracket is at the very end of the bolt, it is likely worn out. Good isolator  Bad isolator  |
