G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Forum » XBoard » Archive through June 28, 2011 » Ecmspy will not refresh « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Burgurboy
Posted on Monday, June 13, 2011 - 05:29 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

hey guys,

I've got another question for ya....

Im trying to do a tps reset,

I cant get ecm spy to give me "live" readings. It's almost like it takes a snapshot of the bikes parameters then freezes there.

The only time i can get a reading from the bike is when i first connect or when im doing something else with the ecm "fetching eeprom, running diagnostics, etc". otherwise, ecmspy is stuck at the last reading.

I hope this made sense. I looked around for some type of refresh interval option within ecmspy but couldnt find anything.

It makes a tps reset impossible!
Top of pagePrevious messageNext messageBottom of page Link to this message

Terrys1980
Posted on Monday, June 13, 2011 - 05:34 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

After the TPS reset or fetchin/burning eeprom are you clicking on keys icon to reconnect? The program disconnects after any one of these actions.
Top of pagePrevious messageNext messageBottom of page Link to this message

Froggy
Posted on Monday, June 13, 2011 - 05:37 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

You need to click the keys icon to have it connect and display live data. You will need to click keys again after fetching, burning, or doing a TPS reset.
Top of pagePrevious messageNext messageBottom of page Link to this message

Burgurboy
Posted on Monday, June 13, 2011 - 06:01 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

sweet...

the keys worked!

I reset the tps and now the bike wont idle. UGH.

I'll try and reset it again...
Top of pagePrevious messageNext messageBottom of page Link to this message

Froggy
Posted on Monday, June 13, 2011 - 06:07 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

It is important to warm up the bike before doing the TPS reset.

Since your not idling, I recommend you raise the idle a bit, take it for a quick spin, then do the TPS reset again.
Top of pagePrevious messageNext messageBottom of page Link to this message

Burgurboy
Posted on Monday, June 13, 2011 - 06:33 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

no dice...

I tried taking the bike around the block for a quick ride. It coughs and sputters like crazy. I can barely let the clutch out and get moving. Overall the bike is running like trash.

I ran it down to the gas station because it was low on gas. I figured that might be the problem... no dice. I still had over a half tank in the bike.

could setting the afv to 100% frig it up like this? thats the only other setting i touched
Top of pagePrevious messageNext messageBottom of page Link to this message

Burgurboy
Posted on Monday, June 13, 2011 - 07:14 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

aw man. im such a nub.

long story short... i didnt turn the idle adjustment screw out enough.


to anyone who encounters a crappy-running-bike after a tps reset: be sure to look at the tps voltage value when turning out the idle screw. once the voltage stops droping, turn it out another full turn. THEN reset the tps.

my bike is back to normal now. Thanks for the help guys!
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration