G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Forum » XBoard » Archive through April 27, 2011 » Chin fairing fasteners and locktite « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Argentcorvid
Posted on Monday, April 25, 2011 - 11:38 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I finally got around to trying to put the chin fairing back on my Uly after changing the oil filter last fall, and some of the screws that hold it on aren't going in easily.

It almost feels like I'm starting to cross-thread them, but I can't seem to get them to start any other way. (I haven't forced anything yet)

Is this due to the previous use of red locktite on the fasteners? I'm pretty sure the previous owner had the dealer do all the oil changes.

If so, I just run a tap through there to clean it out right?
Top of pagePrevious messageNext messageBottom of page Link to this message

Glitch
Posted on Tuesday, April 26, 2011 - 07:48 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Right
Top of pagePrevious messageNext messageBottom of page Link to this message

Andymnelson
Posted on Tuesday, April 26, 2011 - 08:59 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

yup. 1/4-20
Top of pagePrevious messageNext messageBottom of page Link to this message

Pkforbes87
Posted on Wednesday, April 27, 2011 - 05:59 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I leave the residual loctite in there and reinstall the screws dry. Never had one come out, done 4 oil changes now I believe.

I get the same tightening feeling you described though.
Top of pagePrevious messageNext messageBottom of page Link to this message

Natexlh1000
Posted on Wednesday, April 27, 2011 - 07:05 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I find that road-grit and rust are the best locktite. Also cheapest!

If you do run a tap through those holes, you should probably use some actual store-bought locktite though.
Top of pagePrevious messageNext messageBottom of page Link to this message

Gentleman_jon
Posted on Wednesday, April 27, 2011 - 08:11 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Running a 14/20 tap through the hole will probably work, but the proper tool is a tap like item called a thread chaser, which cleans and straightens the threads without cutting them the way a tap can.

It is pretty easy to cross thread and strip these holes, so easy does it.
Top of pagePrevious messageNext messageBottom of page Link to this message

Argentcorvid
Posted on Wednesday, April 27, 2011 - 08:20 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I borrowed a tap and die from work yesterday, and it turns out that a couple of the screws had messed up threads on them.
I couldn't thread the screw holding the die in my hand and turning the screw with a torx driver.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration